0 to 360 with an accuracy of ±0.35 . The magnetic range is 0 to 100,000 nT with an accuracy of ±50 nT. Nature of quality control procedures adopted (e.g., * Not applicable as no sampling or assaying has standards, blanks, duplicates, external laboratory occurred. checks) and whether acceptable levels of accuracy (i.e., lack of bias) and precision have been established. Verification The verification of significant intersections by * Alternative company geologists have verified the of sampling either independent or alternative company personnel. findings of the on-site geologist. and assaying The use of twinned holes. * Not applicable as no twinned holes have been drilled. Documentation of primary data, data entry procedures, * All logging data was entered into a computer on data verification, data storage (physical and site, with daily backups taken and stored on hard electronic) protocols. drives and the cloud. Discuss any adjustment to assay data. * Not applicable as no assaying has occurred. Location of Accuracy and quality of surveys used to locate drill * Drill-holes CADD001, CADD002 & MIDD009 were data points holes (collar and down-hole surveys), trenches, mine located using a handheld Garmin GPS with an workings and other locations used in Mineral Resource accuracy of ±4m. estimation. Specification of the grid system used. * UTM WGS84 Zone 25N. Quality and adequacy of topographic control. * Topographic information was sourced from the Greenland Mapping Project (GIMP) digital elevation model (30m accuracy). Data spacing Data spacing for reporting of Exploration Results. * Not applicable as the drill-holes are targeting and specific geological and electromagnetic targets. distribution Whether the data spacing, and distribution is * Not applicable as the drill-holes are targeting sufficient to establish the degree of geological and specific geological and electromagnetic targets. grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. Whether sample compositing has been applied. * Sample compositing has not been applied. Orientation Whether the orientation of sampling achieves unbiased * The strike and dip of drill-holes CADD001 & of data in sampling of possible structures and the extent to CADD002 were designed to intersect lithological relation to which this is known, considering the deposit type. units at an adjacent angle, not along strike. geological MIDD009 was designed to intersect an structure electromagnetic target obliquely. Therefore, the sampling conducted by the drill-hole is considered unbiased. If the relationship between the drilling orientation * There are no known biases caused by the and the orientation of key mineralised structures is orientation of drill-holes CADD001, CADD02 & considered to have introduced a sampling bias, this MIDD009. should be assessed and reported if material. Sample The measures taken to ensure sample security. * The drill core is stored onboard the Company's security charter vessel which is considered highly secure. It is then being transported to a secure storage facility in Portugal via sealed shipping container. Audits or The results of any audits or reviews of sampling * No audits or reviews have been carried out at reviews techniques and data. this time. Section 2: Reporting of Exploration Results Criteria JORC Code explanation Commentary Mineral Type, reference name/number, location and * The Ryberg Project is wholly within Mineral Exploration tenement and ownership including agreements or Licences 2017/06 and 2019/38, located on the east coast of land tenure material issues with third parties such Greenland. They are held 100% by Longland Resources Ltd, a status as joint ventures, partnerships, wholly owned subsidiary of Conico Ltd. overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. The security of the tenure held at the * The tenure is secure and in good standing at the time of time of reporting along with any known writing. There are no known impediments. impediments to obtaining a licence to operate in the area. Exploration Acknowledgment and appraisal of * Previous work mentioned (2017 VTEM survey) was planned and done by other exploration by other parties. managed by Longland Resources Ltd, a wholly owned subsidiary parties of Conico Ltd. * Historic rock-chip sampling was conducted by Platina Resources Ltd and University of Leicester. Geology Deposit type, geological setting and * Deposit types: Magmatic & VMS. style of mineralisation. * Geological setting: The project area is located within the North Atlantic Igneous Province (NAIP), a Tertiary volcanic centre that covered an area of approximately 1.3 million km^2 in continental flood basalts (6.6 million km^3 in volume), making it one of the largest volcanic events in history. Volcanism is associated with the opening of the North Atlantic, and presence of a mantle plume (what is now the Icelandic hotspot). The project area represents an erosional interface where the flood basalts have been removed, revealing the basement geology beneath. The project area is adjacent to a triple junction (failed rift) and consists of Archaean orthogneiss, Tertiary gabbro/flood basalt, and Cretaceous-Tertiary sediments (rift valley basin). Approximately 70% of the geology within the sedimentary basin has been intruded by Tertiary sills that are feeders to the overlying plateau basalts. There are also feeder dykes and layered mafic intrusions - it is likely that there is also a large ultramafic body present at depth, evidence for this is in the form of ultramafic xenoliths brought to surface by magma conduits. * Style of mineralisation: magmatic copper and nickel sulphides with appreciable cobalt, palladium and gold. Drill hole A summary of all information material to * Refer to Annex 1. Information the understanding of the exploration results including a tabulation of the following information for all Material drill holes: - easting and northing of the drill hole collar - elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar - dip and azimuth of the hole - down hole length and interception depth - hole length. If the exclusion of this information is * This is not the case. justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. Data In reporting Exploration Results, * Not applicable as no assays have been reported.
(MORE TO FOLLOW) Dow Jones Newswires
September 24, 2021 02:38 ET (06:38 GMT)